|
I will try to update as I get some real time on this machine, but for now it truely deserves the five stars I gave it. I don't know if all of the manuals have this misprint, but in my manual, on page 30 it shows to connect wires 1 and 2 with the white wire and wires 3 and 4 with black wire on the motor. If you are converting to 230 Volts the CORRECT way is shown, at least in my manual, on page 11. Can't wait to put the timberwolf blades I have on this. Then connect the black wire(the other hot in a 230v setup) to wire 4 on the motor. It might be a waste of time to switch this to 230 volts, but if you choose to do so READ THIS. Tensioning and tracking the blade was simple. The fine tuning of the guides is a bit unrefined, but still works well with a little time and effort.
Keep in mind that when wiring this for 230v you will have to get an approved 230v plug which will have two hot wires and a ground, NO NEUTRAL IS USED in this 230 volt setup, the white is changed to a hot for 230 volts. I have only used the provided blade, which is probably junk and still does fairly well. It arrived quickly through amazon super saver shipping, and in perfect condition. The unit is a bit heavy for one person to set up on the base. I didn't do it so I can't tell you what will happen when wired like this, but I just got off the phone with Jet tech and it is confirmed that this in NOT correct. IMPORTANT WIRING INFO FIRST: I like this saw very much BUT MY MANUAL CAME WITH AN INCORRECT DIAGRAM FOR WIRING TO 230 VOLTS.
The CORRECT way is to connect wires 2 and 3 together on the motor, then connect the white wire(which will be a hot wire, not a neutral, in a 230v setup) to wire 1 on the motor. MY REVIEW: The bandsaw is great so far. I was cutting eigth inch veneers in no time and they are very accurate. I was able to lift the unit onto the base which was about 200lbs, but it wasn't much fun, get a buddy to help if you can. This is NOT correct. I have only had it for a couple weeks, but I am a very happy customer.
Just don't wire it wrong. Put it together, tuned it up, ADDED THE OPTIONAL FENCE I PURCHASED SEPERATELY WHICH IS SHOWN BUT NOT INCLUDED WITH THE BANDSAW, and was very pleased with the cutting.
This saw replaces an old INCA I've owned for many years and so far I'm excited about this new acquisition. Pleasant surprise and I look forward to many years of use.I didn't give this saw 5 stars only because JET tools are really solidly built but lack a certain refinement, especially in the adjustment methods they use for alignments. I was sold on the built in, large re-saw capability of this saw and no-where in the web page blurb did it mention these wheels. A good band saw has always been a favorite tool for me and this one so far has proved to be a good one, easy to set up, change blades, etc. I was a little disappointed because the picture showed a fence included and I didn't read the "In the box" info. Not a big deal, I can usually work with what is provided, but I choose to be picky about that last star. That ended up working out just fine though because I then bought the KREG precision fence which coupled with this saw makes for a superb tool, (probably better than if it had come with the JET fence).I was happy to see the cast iron wheels instead of the cast aluminum ones I was expecting because I almost bought the POWERMATIC for that reason.
The whole process was painless.Maybe I'll come back in a few months with an update. I wanted a band saw that was easy to operate.3. moved to a 2x4 next, and by 4:00 pm, I dragged a 10 inch oak log off the wood pile and was delighted with how easy it sawed in half.And that was with the standard quarter inch blade that came with the saw. But, within 90 minutes(in a 94 degree -- non-airconditioned shop) I pushed the first piece of wood through the blade. Plus, the delivery guy (ABF freight, I think) was extremely helpful by helping me get the item off the truck, and onto my trailer.
had to find the closest in size and shim and shake, etc., to make it fit. However, even though I am not a super experienced wood artist (yet)., I do feel comfortable that I have purchased a very practical, useful and quality saw that will be able to handle all my current and future requirements.I was also satisfied with the Amazon.com price, and free shipping. Plus, getting it to cut anything over 3 inches thick (even with a new blade) was a chore.So, I began my research, and for the past few weeks I have read just about everything about bandsaws and the many, many options on the market.So, I created a priority list:1. I don't even have decent blades yet, and have already cut out a small box from a piece of 4x4 that just happend to be within easy reach.I know, many would like to see a review of someone who has used this saw for 6 months and has put it through all the possible paces.
I also do not consider myself more than average in creativity.,but, thanks to my Dad (who operated a cabinet shop while I was growing up) I still have a yearning to produce functional, quality wood products. I had several emails from both Amazon and the freight company about delivery, plus two phone calls from ABF to assure me of the delivery schedule, etc. I wanted a saw that could do both "heavy duty" chores, and be able to drop back to the more delicate cuts without having to go through too many alterations.4. Although he could not get down my drive way with his 18 wheeler, he got as close as he could. about noon. I've retired after 36 years of helping thousands of youngsters find some direction in their life. The saw was delivered within 7 days of my order. Couldn't even find a decent belt.
I am not into wood working to create an income. I wanted a quality product that current users held in high regard.2. I wanted a mid-range price saw that seemed to reflect 1-3 above.I finally decided on the Jet DXPR because I wanted the capability of cutting 10-12 inch thckness. He was a "tough" teacher, but, now in my later years; I realize how much of a GENIUS he really was.
Yep, started with a piece of quarter inch panel wood. The one thing he always held as paramount was this: To do the very best, you must have the right tools.I was able to partially restore his old (at least 45 years old by now) Delta band saw, but there is only so much you can do with something of that age.(hope my wife don't read this). I know there were several reviews that spoke of an adapter you could put on a regular 14 inch saw to increase from 6 inches to 12 inches, but when I compared the prices, buying the DXPR (it was a little more I think) just made sense.Well, it arrived today. And, even though I have operated a band saw before, I have never "set one up from scratch".
Had to get my wife to help melift it onto the base.
|
May be eligible for FREE Shipping offer
