Woodline USA WL-2066 66-Piece 1/2-Inch Shank Tungsten Carbide Master Router Bit Set

• Woodworking Basics: Mastering the Essentials of Craftsmanship
• The Complete Manual of Woodworking
• The Complete Illustrated Guide to Furniture and Cabinet Construction
• BOSCH RA1181 Benchtop Router Table
• Bosch 1617EVSPK 12 Amp 2-1/4-Horsepower Plunge and Fixed Base Variable Speed Router Kit with 1/4-Inch and 1/2-Inch Collets

What's in the Box

Straight Bits: 8

1-inch diameter by 3/4-inch cutting length

1/4-inch diameter by 3/4-inch cutting length

5/16-inch diameter by 1-inch cutting length

3/8-inch diameter by 1-inch cutting length

7/16-inch diameter by 1-inch cutting length

1/2-inch diameter by 1-inch cutting length

5/8-inch diameter by 3/4-inch cutting length

3/4-inch diameter by 3/4-inch cutting length

Dovetail Bits: 5

1/4-inch diameter by 7.5-degree

3/8-inch diameter by 9-degree

1/2-inch diameter by 14-degree

5/8-inch diameter by 14-degree

3/4-inch diameter by 14-degree

Core Box Bits: 3

1/4-inch diameter by 1/4-inch cutting length

3/8-inch diameter by 5/16-inch cutting length

1/2-inch diameter by 3/8-inch cutting length

Round Nose Bits: 3

1/4-inch diameter by 5/16-inch cutting length

3/8-inch diameter by 1/2-inch cutting length

1/2-inch diameter by 5/8-inch cutting length

Laminate Trimmers: 2

3/8-inch diameter by 1-inch cutting length

1/2-inch diameter by 1-inch cutting length

Mortising Bits: 3

1/2-inch diameter by 3/4-inch cutting length

5/8-inch diameter by 3/4-inch cutting length

3/4-inch diameter by 3/4-inch cutting length

Plunging Panel Bit

3/8-inch diameter by 1-inch cutting length

Fluted Laminate Trimmer Bit

1/4-inch cutting length at 25-degree bevel

Bevel Bits

1/2-inch cutting length at 30-degree bevel

90-degree V-Groove Bits: 3

3/8-inch diameter by 3/8-inch cutting length

1/2-inch diameter by 1/2-inch cutting length

5/8-inch diameter by 5/8-inch cutting length

Roman Ogee Bits: 2

1/4-inch radius ogee with 3/4-inch cutting length

5/32-inch radius ogee with 1/2-inch cutting length

Roundover Bits: 6

1/2-inch radius by 1-1/2-inch total diameter

1/8-inch radius by 3/4-inch total diameter

3/16-inch radius by 7/8-inch total diameter

1/4-inch radius by 1-inch total diameter

5/16-inch radius by 1-1/8-inch total diameter

3/8-inch radius by 1-1/4-inch total diameter

Plunging Roundover With Bead

5/32-inch radius by 3/4-inch cutting length

Double Roman Ogee With Stepped Cove

1-1/2-inch diameter by 5/8-inch cutting length

Point Cutting Roundover

1/4-inch radius by 1/2-inch total diameter by 1/2-inch cutting length

Ogee with Fillet

3/16-inch radius ogee with 1-3/8-inch total diameter

Plunging Roundover

1/4-inch radius by 3/4-inch total diameter

Stepped Cove

5/16-inch radius by 1-1/4-inch total diameter

Edge Beading Bits: 2

3/8-inch diameter bead by 1-inch total diameter

1/4-inch diameter bead by 7/8-inch total diameter

Multi Beading Bit

double 1/8-inch radius beads by 7/8-inch total diameter

Bowl and Tray Bit

1/8-inch radius by 1-inch total diameter by 1/2-inch cutting length

Key Hole Bit

3/8-inch large diameter by 1/2-inch cutting length

Double Roman Ogee

3/16-inch radius by 1-1/4-inch total diameter

Classic Double Roundover

5/32-inch radius by 1-1/8-inch total diameter

60-degree V-Groove - Flat Bottom

5/8-inch total diameter by 60-degree

60-degree V-Groove - Standard

5/8-inch total diameter by 60-degree

Rabbeting / Slot Cutting Bits: 3

1/4-inch kerf by 1-1/4-inch total diameter

3/8-inch kerf by 1-1/4-inch total diameter

1/2-inch kerf by 1-1/4-inch total diameter

Chamfer Bits: 4

30-degree by 1-inch cutting length

22.5-degree by 1-inch cutting length

15-degree by 1-inch cutting length

45-degree by 5/8-inch cutting length

Cove Bits: 6

1/8-inch radius by 5/8-inch total diameter

3/16-inch radius by 3/4-inch total diameter

1/4-inch radius by 7/8-inch total diameter

5/16-inch radius by 1-inch total diameter

3/8-inch radius by 1-1/8-inch total diameter

1/2-inch radius by 1-3/8-inch total diameter

Wooden case was damaged when received. Would not order from again. Wood splintering on one edge of case and both latches were loose. Bits were in good condition but looked like they may have been wet at one time as rust was on padding underneath the bits.

The router set is great but since my purchase in November 2009, the price has dropped from $171 to $149 and Amazon does NOT guarantee the price. Buy elsewhere so that you can receive a price guarantee/ For this reason, I do not rate this item high.

Very nice kit. very halpful with basic jobs, i'm glad it was made in USA, not in china, if you are wood worker, you'll understend me.

Probably due to lack of complete oiling. I keep coming back to this manufacturer so they must be doing most things right. I'd give them 5 stars if the case were sturdier and if I didn't need to break out the steel wool. There was also some rusting of the shanks on a few bits. I've used several woodline bits and these are of good quality just as the others were.

You won't find any bits of this quality any cheaper so I guess I'm pretty happy with my purchase. Unfortunately, the case is built cheaply(had to tighten the screws and adjust the hinges). The rust comes off with some steel wool but it shouldn't ever be an issue. Not Freud or Whiteside but close. All in all, the bits are razor sharp and retain a good edge over their lifetime.

This set has all the key bits I was looking for, and the construction seems fine. If that turns out to be the only thing wrong, I think I've gotten a very good deal -- I'd rather have the quality/money put into the bits anyway. I haven't used them long enough to know how quickly the cutting edges dull, but so far I've been pleased. The dovetail bits, rabbeting bits, dado bits, and flush trim bits are all meeting my needs quite nicely.The price on Amazon was only $4 more than the "trade show special" price at the Wood Show locally, so it turned out to be a good buy here.The only immediate drawback is that the back/bottom of the wooden case is already falling out, though, with only very light use.