Anytime Tools 5 diamond dust hole saw for tile/glass/marble holesaw 3/4", 1", 1-3/16", 1-3/8", 1-5/8"
|
List Price: N/A
Our Price: $39.99
Availability: Check for availability
Average Customer Rating:  
Manufacturer: AnytimeTools
Prices subject to change. Please verify price during checkout.
|
|
Brand: Anytime Tools
Manufacturer: AnytimeTools
|
|
|
|
|
Features
|
Sizes: 3/4", 1", 1-3/16", 1-3/8", 1-5/8"
Excellent results in glass, marble, slate, and tile.
Segmented design works better and lasts longer
The diamond coating on these saws give superior performance and life
Note: To prolong the life of these bits, use on a low speed with coolant (water/oil)
|
|
|
|
|
Editorial Reviews:
|
The diamond coating on these saws give superior performance and life. Excellent results in glass, marble, slate, and tile. Nickel plated. Segmented design works better and lasts longer. Sizes (Shank diameter: 3/8"): 3/4" 1" 1-3/16" 1-3/8" 1-5/8" Note: To prolong the life of these bits, use on a low speed with coolant (water/oil)
|
|
|
User Comments about the Anytime Tools 5 diamond dust hole saw for tile/glass/marble holesaw 3/4", 1", 1-3/16", 1-3/8", 1-5/8"
|
|
Make sure to create a plumber's putty berm around the area you are cutting and fill it with water. Great product. I used them to cut holes in 3/8" thick porcelain tiles. This will make sure that the saw stays cool during cutting. They take a while but they cut a nice clean hole without breaking the tile.
I had started with a carbide grit hole saw, but, after hours of slow progress, decided to purchase these. I used a small piece of plywood into which I had cut a hole to the size of the diamond dust hole saw I was going to use. Once the hole was started, I was able to remove the template and continue.Keep a spray bottle of water handy and frequently squirt the saw and material to keep it cool and lubricated. I used these hole saws on vitreous china. I centered my template and secured it with duct tape.
The job was done neatly and quickly. The diamond dust hole saw took only minutes to complete the job. The carbide saw showed obvious signs of wear. The diamond dust saw looked as good as when I unpackaged it.You might note the lack of a pilot bit and wonder how to center your hole.
Great product at the price. I've only tried one of the bits so far but, it worked flawlessly.
|
|
|
 |
|
|
