Paslode Cordless 16 Gauge Straight Finish Nailer #902000

List Price: $299.99
Now Only: $262.99
You Save: $ 37.00 ( 12% )
Availability: Usually ships in 24 hours
Average Customer Rating:

Manufacturer: Paslode

May be eligible for FREE Shipping offer

Prices subject to change. Please verify price during checkout.

Batteries Included: Yes
Brand: Paslode
Manufacturer: Paslode
Model: 902000
DteCode: d12

Features
Quick-clear nose cover for quickly clearing jams Comfortable "Sure Grip" Handle for optimal comfort and control Compact and lightweight (just 4.75 lbs) for easy handling Shoots ¾- to 2-1/2-inch nails for a wide variety of finish nailing applications Tool-free depth of drive for less downtime and precise nailing

Accessories

B & C Eagle B16-34 3/4-Inch by 16 Gauge Galvanized Finish Brad Nail (2,500 per Box)
B & C Eagle B16-1 1-Inch by 16 Gauge Galvanized Finish Brad Nail (2,500 per Box)
B & C Eagle B16-114 1-1/4-Inch by 16 Gauge Galvanized Finish Brad Nail (2,500 per Box)
B & C Eagle B16-112 1-1/2-Inch by 16 Gauge Galvanized Finish Brad Nail (2,500 per Box)
B & C Eagle B16-134 1-3/4-Inch by 16 Gauge Galvanized Finish Brad Nail (2,500 per Box)

Related Items

Editorial Reviews:

3/4" - 2-1/2", Cordless, 16 Gauge, Straight Finish Nailer, Weight 4.75 LBS With Battery, Height 11-3/4" Nail, Capacity 100, 2 Strips Length 3/4" - 2-1/2" Cycle Rate 2-3 Nails/Second Fuel Cell Life Approximately 1200 Nails Battery Life, Approximately 4000 Nails Fastener, Type 16 Gauge, Straight Belt Hook Reversible No-Mar Tip, Replaceable Features Fast Set Up, No Hoses, No Compressors, Powerful Motor Drives 3/4" - 2-1/2" Finish Nails In Hard Woods Compact Lightweight Design.

User Comments about the Paslode Cordless 16 Gauge Straight Finish Nailer #902000

This nailer works just great. It is very nice to work with. Tried 3 different size nails and works like a charm. It is light and compact so fairly good in tight places.

Both have worked extremely well and are extremely reliable and consistant. The nails would sometimes go through the oak tongue, bounce off the floor and back up through the face of the oak. I ran into this problem when installing an oak hardwood floor, as when you run out of room for the floor stapler up against a wall you have to use finish nails. I own 2 of the Paslode finish nailers, a straight and an angled nailer. It is lightweight enough to use overhead without difficulty, as I did nailing crown-molding, and powerful enough to drive into solid oak when woodworking. Decreasing the angle of penetration was enough to cure this. I did have some difficulty with the Paslode brand finish nails in that they are fairly soft and can deflect off dense surfaces like OSB.

Now that I'm on my own working as a Cabinetmaker, I love not having a compressor and hose to deal with.just grab and go--in the shop or in the field. I love the Paslode cordless products. I've been using a cordless framer for over a year with no problems. Get yourself one of these. I used the finish nailer years ago working as a finish carpenter, and loved it then.

JUST CHARGE UP YOUR BATTERY (TAKES ABOUT 2 HOURS FOR FULL CHARGE) AND PLUG IN A FUEL CELL AND SOME 16 GA NAILS AND YOUR GOOD TO GO. THE DEWALT NAILER WITH 18 VOLT BATTERY WEIGHS JUST OVER 8 LB., BUT THIS PASLODE WITH A 6 VOLT BATTERY AND FUEL CELL WEIGHS JUST OVER 4 LBS. WHOEVER DESIGNED THIS TOOL IS A GENIUS. THIS NAILER IS FANTASTIC. BATTERY WILL LAST FOR 4000 NAILS AND FUEL CELL LASTS FOR ABOUT 1200 NAILS. GET ONE AND YOU'LL BE LOOKING FOR THINGS TO NAIL. COMES WITH NICE CASE AND BATTERY CHARGER, BUT YOU HAVE TO BUY YOUR FUELS CELLS AND NAILS SEPARATELY.

This nailer is easy to maintain and operate.It saves so much time working on projects that would be near impossible to do with a hammer. Excellent product. I've used this to install complex wall and ceiling trim, wainscoting and just general use.