Leatherman 934870 40 Bit Assortment with Nylon Sheath

• Leatherman 830850 Skeletool CX Multitool
• Leatherman 934850 Quick-Release Pocket Clip and Lanyard Ring
• Leatherman 830039 New Wave Multitool with Leather Sheath
• Leatherman 830684 Charge TTi with Leather Sheath and Gift Tin
• Leatherman 830040 New Wave Multi-Tool with Nylon Sheath

About the Leatherman 934870 Bit Kit
The Leatherman Bit Kit expands your driver's capabilities with 21 double-ended tool steel bits (42 tips total). Use this kit with your Surge, Charge AL, Charge ALX, Charge TTI, Wave or the Removable Bit Driver. This kit includes a wide assortment of hex, Robertson, Pozi, Torx, Phillips and slotted bits, plus a nylon sheath to keep the kit organized and easily transportable. Made from steel with a zinc coating, these bits are 35 percent stronger than stainless steel bits, and more resistant to corrosion.

Bit Kit Contents:

• Hex 1.5mm and 2mm
• Hex 2.5mm and 3mm
• Hex 4mm and 5mm
• Hex 6mm and 1/4 inch
• Hex 7/32 and 3/16 inch
• Hex 5/32 and 9/64 inch
• Hex 1/8 and 7/64 inch
• Hex 3/32 and 5/64 inch
• Hex 1/16 and .050 inch
• Robertson #3 and #2
• Robertson #1 and Pozi
• Pozi #2 and #1
• Torx #10 and #15
• Torx #20 and #25
• Torx #27 and #30
• Phillips #0 and #3
• Phillips #1 and #2
• Slotted 3/32 and 1/8 inch
• Slotted 5/32 and 3/16 inch
• Slotted 7/32 and 1/4 inch
• Phillips and flat tip eyeglasses screwdriver

Warranty:
Close inspection reveals the quality and attention to detail that make Leatherman products more useful and effective. Using the best stainless steel, ingenious design and rigorous tolerances, Leatherman makes the useful products that customers want, and backs them with a 25-year guarantee. A genuine Leatherman tool is always ready when you need it.

What's in the box:
Leatherman bit kit with 21 double-sided bits, removable bit driver, nylon belt sheath.

I find the set of bits to be perfect for all my work needs. I'm very satisfied and the price was very good. Every bit I need is there.

These bits do complete the Leatherman Wave I bought, but I could have done without them. So my tool can't open itself.Unlike Amazon's picture, my bits came in black rather than translucent plastic carriers, but the sheath and bits are accurately depicted. I enjoy using them and am pleasantly surprised when switching bits gets the job done. That being said, the set is curiously missing hex bits with a hole in the middle which could open up my Leatherman Wave.

After 8 years of working in naval nuclear power plants where I could keep almost a full tool belt on every day it has been quite difficult adjusting to only having a few items on my belt. A real time saver. The combination of the Leatherman Wave along with this bit assortment has helped me maintain the work anywhere usefulness I was used to without looking odd in the civilian world.Like several other reviewers to prevent from having too many sheaths on my belt I sorted through the bits to make one holders worth of the most common bits that I keep in same sheath as my Leatherman Wave.Though a Leatherman and these bits will not replace a well stocked tool kit they will allow for rapid fixes on the spot.

I recommend for folks who need access to lots of different tools throughout the day or just to keep around in the car or RV as an emergency kit.PS - my strips came in black not clear/white as shown on Amazon. What a great idea from Leatherman. I keep these on me in a nylon Wave case with a Skeletool and they are really nice to have around. Personally I prefer the black. It's a bit heavier setup than I'm used to, but I like the idea of having many bits at my disposal.

I don't wear it on my belt so I looped the Wave case flap through the bit case loop. Just want to add my vote to the other reveiws.At first I was concerned about the half width allen bits (they are called something else). But they actually work very well. That way they are always together. I even take it with me bicycling.