|
This is a great tool. I don't know and don't even care where it is made, it just plain works.This is a great tool. I ordered a Milwaukee metal cutting circular saw from an Amazon vendor to use to help clean up the mess. O.K. It cuts at full power until the battery is empty and then it just stops.
It truly earns its "Milwaukee" brand name. It is precise and easy to handle, the orbital/straight action switch is a plus, it is light weight and the folding adjustable handle makes every cut perfect. Of course in that condition it was useless to me, so I got out "The Hatchet" installed a 10" "Bosch metal cutting blade" and attacked the debris pile. When I find a deal on one and it fills a gap in a "set" like Milwaukee, Dewalt or Makita, I have to have it. I love it.
(you can look at my other reviews to get that story.not good) They shipped it to me without the blade. I weigh 220# and lean on this thing to hog out a lot of material and I don't slow it down. It also cut the remains of the 4 x 6 pressure treated posts to eliminate the "Stonehenge" architecture that was left. I like tools and I suffer from excessive compulsive behavior.
I pop in another battery and away we go again. so I am a sick puppy but hey, it's harmless enough and until recently I could afford it.The Milwaukee cordless hatchet is the first tool I reach for when I need a Sawsall. I don't even know how many cordless reciprocating saws I have, probably 10 or 15.
My 34 x 52 pole barn recently burned down and I needed to cut up a large amount of sheet metal from the roof and side walls. It just doesn't get any better than this, or at least I have not found a saw better than this yet. It is easy to control and has the power to use the thick "demolition" blades when needed, but can do precision cuts with thinner blades in delicate situations.
It does an amazing amount of work on a battery charge. It doesn't matter if I already have 10 of them in other brands and configurations. This saw is amazing, with the 10" Bosch metal cutting blade it cut through the sheet metal like a hot knife through butter.
I use it with my 18 Volt Lithium Ion Batteries and I am constantly amazed at the work it does.
They're famous for a reason. Nobody every asks for a "reciprocating construction saw" -- they ask for a Sawzall. Neglecting the fact that it's a much more convenient term, you have to realize that the Milwaukee name has been synonymous with these tools for longer than I want to admit knowing about them, and I've *never* used one in a situation where the convenience of cordless operation would outweigh the need for a REAL power tool. Cheaper too. Get a Sawzall, or if 11 amps isn't good enough the 13-amp Super Sawzall.
igive this saw a 10 out of a ten It does everything I wanted it to do when I purchased it, Power, ease of use, and the ease of changig blades, a little heavy, but ,hey if thats what it takes to do the job I love ti
Do a search under the replacement batteries on Amazon and read the reviews. I just want to say that you WILL NEED 2 batteries. I generally agree with first review. If you are buying the tool for home use and will not be using it daily, be sure to cycle the batteries anyway. Pluswise, this thing is handy around the house and at the local pick a part.BTW: milwaukee sux The battery voltage can drop so low the charger will no longer charge it - battery spent.
Lightweight, but has all the power of a corded tool in my opinion. I'm not sure it's even an issue, and the charger gave me the heads up signal that the battery was too hot, so I set it aside for a couple minutes, then charged it right up no problem. Well worth it and a great deal. and have been been in business since 1986.
Both feel great, good balance, and work great, period. The adjustable handle is great when up on a scaffolding or working down near the floor.and the reversible 18 volt battery is another great feature. Changing blades has always been one of the worst and slowest parts of using a sawzall.now it's not even an issue.FWIW, I also have an 18 Volt 1/2" Lok-Tor Driver/Drill Kit so I just use my battery charger and 2 batteries for both tools. Sawing through an 1 1/4" solid wood exterior wall for a door opening, NO problem. My website is copperwork.com
I also recommend the blade kit.very nice to have. This and my new 1/2" drill are by far the best. I'm a coppersmith who started out as a roofing contractor, and have been working in the renovation and building trades for 26 years. Ripping through studs and rafters, NO problem. One night after a long night of overhead work I was tired and fed up, so I threw my new 18" drill from 10' up on a ladder down to my concrete shop floor to see what it was really made of, and it took the hit with nothing but a scuff to the body.
Cuts right through heavy duty mild steel 1/8" easily. I just finished gutting a garage for a renovation and wanted to put this tool to the test.it passed with flying colors. The orbital action is another nice feature.and it does speed up rough rip cuts when neatness doesn't count.This is the 1st time I've used a quick blade holder on a sawzall, and it is one of the best features going. You will definitely need 2 batteries with this tool. I've read a lot of reviews on this site when buying tools,and many have been very helpful, so I've decided to return the favor to hopefully help someone out. I've owned alot of Milwaukee tools over the years, and still do.
Sawing through a double 2 x 12 header beam, NO problem. After about 8-9' of continuous cutting through a solid wood 1 1/4" thick wall and 7-8 studs, the battery needed to be swapped out, but had to cool down for a few minutes before accepting a charge. I can't imagine a situation where you would be slowed down as long as you have two batteries.These tools are tough as nails too. Regardless, you will get a lot of cut time on one battery, and a lot of power too.
|
May be eligible for FREE Shipping offer
