Freud LU84R011 10-Inch 50-tooth ATB Combination Saw Blade with 5/8-Inch Arbor and PermaShield Coating

• Oshlun SDS-0842 8-Inch 42-tooth Stack Dado Set with 5/8-Inch Arbor
• Freud LM74R010 10-Inch 30 Tooth TCG Glue Line Ripping Saw Blade with 5/8-Inch Arbor and PermaShield Coating
• Freud LU87R010 10-Inch 24-Tooth FTG Thin Kerf Ripping Saw Blade with 5/8-Inch Arbor and PermaShield Coating
• Freud LU80R010 10-Inch 80 Tooth Hi-ATB Ultimate Plywood and Melamine Cutting Saw Blade with 5/8-Inch Arbor
• MLCS 8377 Router Bit Set with Carbide tipped, 1/2-Inch Shank, 15-Piece

About Freud LU84R Industrial Combination Blades
Freud’s industrial series blades were designed for the serious woodworker. Available in a variety of styles for different applications, LU blades feature thick carbide tips, precision-tensioned bodies found in every Freud quality blade. Some LU blades include a red Teflon coating that helps reduce friction, heat build-up, and gumming – which prolongs the life of the blade.

The LU84R Family

About This Product: Freud LU84R011 10-Inch 50-Tooth Combination Saw Blade
The Freud 10-Inch 50-Tooth Combination Saw Blade with Perma-Shield coating features four alternate top bevel teeth and a square raker tooth per section that lets you cut hardwoods and softwoods with a smooth, clean edge. The thick MicroGrain carbide tips allow for more cuts between sharpening, and the non-stick Perma-Shield coating reduces gumming, rusting, and corrosion. The blade features a 5/8-inch arbor and comes with a limited lifetime warranty.

Applications
The Freud LU84R011 is ideal for ripping or cross-cutting hardwoods and softwoods with a smooth, clean edge.

Key Tech Specs

• Thick MicroGrain carbide tips
• Non-stick Perma-Shield coating
• Laser cut blade body
• Kickback reducing design
• Tri-metal brazing for impact-resistant tips

Warranty
Freud saw blades are covered by a limited lifetime warranty.

Again, a smooth a glass, effortless cut.If you have a tablesaw, this is the blade to have. In minutes I was back in business. The kerf is not thin. I only used Freud Blades, Period. I needed a new blade as I accidently hit a metal object embedded in a board. The blade arrived on time thanks to 2nd shipping with Amazon Prime. Nothing better than a fine tuned saw with an excellent blade. However, the inertia of this solid blade makes for the vibration free cuts everyone must have.

Nothing else. My first cut was a sheet of 5/8" ACX plywood and the cut was like a newborn baby's skin. I'm ordering another. My second cut was ripping down 1-7/8" LVL beams.

Excellent cut, Low noise level, Perma Shield coating allows very little residue build up. Top notch product for the price.

This is excellent performance in a modestly-priced blade, plus it's coated. I've truly used it as an all-around blade - I haven't, in fact, put a dedicated crosscut or rip blade on the saw yet, as I've been happy with the cuts I've been getting. I bought this blade for my new Jet Deluxe saw to replace an older combination blade I had on hand. Crosscuts are as good as I've seen with a crosscut blade in the past. I think it's a good buy. I can feel a bit of drag ripping, compared to using a dedicated rip blade, but the cut is still excellent.

This blade makes very clean cuts. The occasional cleanup of the blade and it's back like new. I have cross cut and ripped Maple, Walnut, Oak, Pine, Poplar and plywood all with nice crisp cuts.

I like this blade, it gives you a fairly good cut, but not as good as what I get with the 80 teeth crosscut blade or their 24 teeth rip blade. On the other hand for real fine work I would always go to a dedicated blade. Considering that it is a combination blade and the convenience of not having to switch blades I would highly recommend it.