|
This is the only brand of jig saw blades that I have in my shop. This applies to the several other tooth designs that I keep on hand--all Bosch--all good blades. As long as Bosch keeps selling these quality blades made in Switzerland I won't even consider any other brand.
They were the post form type, and it made the whole job much easier cutting out sink holes from the top (no chips at all). The blades may work in a standard jig saw but I did not try them. I used 3/4 plywood under the laminate counter, so the overall thickness where the holes were cut was 1 -1/2 inches. I used these with a Bosch jig saw to cut laminate counters after they were installed. Avoids flipping over a counter after cutting a large sink hole in the middle. I ordered the countertops from hd, ready-made from the fabricator, straight runs of counter only, and recommend this approach -if you only do counter tops every 20 years or so. Also it's easier to mark out on the top side.
THESE BLADES WORK FANTASTIC IN LAMINATED COUNTER TOPS FOR CUTTING SINK HOLES FROM THE TOP SIDE WITHOUT CHIPPING.
Great quality.Effortless to change between different types of blades.
|
May be eligible for FREE Shipping offer
