Delta 28-176 9-Inch Band Saw Blade 1/8-Inch x 59-1/2-Inch, 14 Teeth per Inch

List Price: $11.74
Now Only: $8.99
You Save: $ 2.75 ( 23% )
Availability: Usually ships in 24 hours
Average Customer Rating:

Manufacturer: Delta

May be eligible for FREE Shipping offer

Prices subject to change. Please verify price during checkout.

Brand: Delta
Manufacturer: Delta
Model: 28-176

Accessories
Empire Manufacturing TOOL-6D The Complete ToolSaver System Wood Woodworking Basics: Mastering the Essentials of Craftsmanship

Related Items
Delta 28-177 9-Inch Band Saw Blade 1/4-Inch x 59-1/2-Inch, 6 Teeth per Inch Delta 28-178 9-Inch Band Saw Blade 3/8-Inch x 59-1/2-Inch, 6 Teeth per Inch Factory-Reconditioned Skil 3385-01-RT 2.5 Amp 9-Inch Band Saw MK Morse ZCDB06 59 1/2-Inch x 1/4-Inch x .014 6TPI Wood Working Bandsaw Blade MK Morse ZCZA14A 59 1/4-Inch x 1/8-Inch x .014 14TPI Wood Cutting Bandsaw Blade

Editorial Reviews:

This 9-inch band saw blade from Delta is a high carbon steel replacement blade with precision machined and set teeth for accuracy. It has been tension-tested for strength, and it's a general purpose blade that cuts wood, plastic, or composition materials. The 28-176 fits the Delta 9-inch band saw (28-150) and other saws that require a 59-1/2-inch blade; but this blade is also available in a 72-1/2-inch length for 10-inch band saws by Delta, Dremel, or Skil.

User Comments about the Delta 28-176 9-Inch Band Saw Blade 1/8-Inch x 59-1/2-Inch, 14 Teeth per Inch

The blade broke after about 10 minutes of use cutting straight lines in thin plastic.Since I was changing from a 1/4" blade, I had to reset all my guides, tracking and tension. The job at hand required trimming a stack of 3/8 x 1/8 plastic strips to length.An extended fence was used which supports the plastic strip on both sides of the blade. And it was probably less than 5 minutes of actual cutting. I would give this minus 5 stars if I could. The upper blade support was about 1/4" above the surface of the plastic. A cutout was placed in the fence at the blade position and a stop was placed in the T-Fence slot so once the blade got through the plastic it never touched the extended fence. I've been doing this for 25+ years so I know how to set up a saw for a particular blade.This blade broke after about 10 minutes.