|
good as ever, sharp as h**l. amazing. somehow between the last thing i ordered and this someone forgot how to get to my house. this i had to go get while the other box in this order was on my porch.
These 22-562 blades work well for softer woods, but for hard wood they seem to dull fast, I planed a small pile of hard maple and had to index the blades, it would be nice if they had carbide edge blades for hard wood. But all in all for the size of the machine they are worth the money.
Product is easily installed and provides quite a sharp edge. Other than that, which is probably true for all planers, great product.and when the edge does get dull, flip them around and use the second edge. They seem to stay sharp for quite a long time. Although I'm generally protective about what I feed into the planer, the edge does get nicked and produces raised lines on the finished product.
Sharp blades are a joy to work with, and take a lot of frustration out of woodworking. I have a Makita planer as well, and the Delta, in my opinion, rates right up there with it. I just want to write a few words about the importance of sharp blades, and how to keep them that way.When you replace the blades, you are going to notice an immediate difference. This goes for very wide planks of very hard woods. Most woods, particularly hardwoods, have a certain slope to their grain. Sharpening often also reduces nicks and tear-outs.Third--plane in the right direction. This tool is meant for jointers, but it works great on planer blades, and the best thing is, you can sharpen them right there on the planer without taking them off. Both are dense, hard, and heavy.
It costs about $40, and I recommend the diamond version.Second--sharpen often. A 12" wide board seems to glide through with a new blade.The thing is, a new blade doesn't stay "new" for that long, particularly if you are planing a lot, and are planing hard woods. Don't worry too much about the wood getting wet and warping. This will easily triple the life of your blades.
I've planed literally thousands of board feet with my two planers. In 5 minutes, you're done. The direction that your hand slides over smoothest is the direction that you should be feeding your board into the planer. I have used this technique when my blades were beyond sharpening and I didn't have a spare on hand.
This dramatically softens the grain, and eases planing. With hardwoods, the water doesn't soak in much, and the wet wood is removed in one or two passes through the planer. In any case, your blades will eventually wear out, so keep a set of spares on hand. Your hand will probably slide over it more easily in one direction than the other.
It will give you a smoother board and save your blades some wear.Finally--if your wood is really hard, wet it with a sponge before planing. Both are great. The two hardest woods I have planed are bubinga (used for guitar backs) and olivewood. Okay--I have the planer, and I have bought the spare blades.
So--after years and years of planing--here are a few things I have learned for keeping your blades sharp.First--sharpen them with the Hone-Mate, which you can get from Woodworker's Supply (www.woodworker.com). I hope these suggestions are useful. The new blades are exceptionally sharp. Let the water soak in for about 30 seconds.
The planer will make a lot less noise, and the wood will slide through easily. The duller a blade is, the faster it wears--both on itself, on the planer, and on your nerves as you try to force a piece of wood through an increasingly noisy planer. Happy woodworking. Feel the wood, with the grain, from one side to the other.
Delta 22-562 12-1/2-Inch Steel Knife for 22-560 Planer (2-Pack) Super fast delivery. I'll order again when I need them. Received it in two days. Very impressive.
|
May be eligible for FREE Shipping offer
